This product is a viscous dehazer and degreaser that is designed for the removal of cured stains on a variety of inks. LIQUID RENU-IT® cleans mesh of stains with less noticeable odor and works better than most hazardous stain removers.
I Before using LIQUID RENU-IT®, remove all emulsion from the screen.
II Brush product on the ink side of a wet or dry screen. Agitate on both sides of the screen with a non-abrasive brush or pad and set aside for approximately 3-30 minutes.
III High pressure water rinse, spraying from the top bottom to top, on the print side of the screen. Reverse screen and high pressure rinse. Allow screen to dry.