Application Technique For 100% Cotton Discharge
STENCIL: A water proof direct emulsion or capillary film should be used for optimal performance.
SQUEEGEE: 60-80 Durometer square edge
MIXING: Mix 10% or less pigment with 100% discharge binder making sure to mix pigment into binder before mixing in the Discharge Agent. Discharge Agent should be mixed at 4-6% into 100% discharge binder (by weight).
DRYING: Discharge inks must be heat cured for 2.5 - 3 minutes at 300 to 320 degrees F.
FINISHING: It is highly recommended to wash and dry garments or fabrics before packaging and shipping.
CLEAN UP: Use water and mild soap to wipe screens, screen frames and squeegees and any surfaces in contact with ink.
** It is the responsibility of the printer to test and determine suitability of all products before a production run.